top of page
Home > Floor Cleaner > EXVAC900
The LDS 5.0 robot cleaner -Mamibot EXVAC900 SURPASS configured with the latest Lidar navigation system, D-tof sensors and ultrasonic sensors that can improve its cleaning performance.
Mamibot EXVAC900 Surpass features four levels of adjustable suction power (from 650Pa to 4000Pa), three levels of wet mopping seepage speed, 100 to 245 minutes of running time, App, voice control, multiple cleaning modes, self-charging, scheduling, Mapping, Zoning, Room Selecting on APP.
***The edition without trash self-emptying is named EXVAC900 Surpass, while the edition with trash self-emptying is named
EXVAC900S EXCEEDER. Please subject to the exact product you buy from your sellers..
EXVAC900
Up to 4KPA Suction
LDS 5.0 Robot Cleaner
Surpass
Mamibot’s Latest Model
High-end Flagship Robot
Upgraded
AI Tech
CLEAN SMARTER
LDS 5.0 Navigation
Precise Mapping
Intelligent Zoning
Up to 4KPA Suction
Multiple Modes
Optimized Vacuuming
5200mAh
Li-ion Battery
D-TOF Sensors
3 layers of Filtering
3-levels of Seepage
4-levels of Suction
1.5-2cm Climbing
9.8cm Slim Designed
All-in-one App
OTA Upgrading
CLEAN STRONGER
CLEAN DEEPER
CLEAN EASIER
LDS 5.0 Navigation
The LDS 5.0 navigation system provides fast and precise scanning for the mapping and cleaning patterns
Saves up to 5 maps
EXVAC900 scans your floor structure, and saves up to 5 different maps so that it can recall the cleaning patterns and execute cleaning efficiently
Vacuuming, Sweeping and Mopping Integrated
EXVAC900 is a hybrid robot cleaner. The mopping time lasts up to 90 min with one 300ml full-filled detachable water tank
All-in-One APPControl your EXVAC900 anywhere at any time
OTA upgrading
Change Modes
Mapping
Change Suction
Change Seepage
Scheduling
Divide Areas Automatically
Select
to-be-cleaned
Zone a to-be cleaned Room
Virtual Barrier
Name Multi Rooms
Single-room Selection
Adjustable Suction in 4 levels
Turn it in Max Suction for heavy dirty and dust cleaning, change it to standard mode for general sweeping, lower to Mini to enjoy quiet vacuuming.
300ml Water tank (+/-5%)
The water tank is electronic-controllable, with 3 levels of seepage speed. It is also possible to control the seepage on the APP page. One full tank of water is able to support a 90 minutes lasting wet mopping.
300ml
Water Tank
3 levels of
Seepage Flow
Our Water Tank
Old Detachable
Water Tank
300ml for bigger mopping capacity
Maximum 150ml only for smaller area
Leaking whenever attached
Seepage flow not controllable
3 levels of controllable speed
Automatically stop leaking in parking, triggered by your order
Bigger area with a 30cm wide cloth
Uneven leaking in narrowed area
Remote Operating & OTA Upgrading
Start/Stop
Change Modes
Mapping
Change Suction
Seepage Adjusting
Schedule Setting
Upgrade the firmware and APP edition via OTA, control and check your robot from smart phone at any time, from anywhere when network is available.
D-TOF Sensor
EXVAC900 is configured with D-TOF sensors which can support the laser better in scanning and wall-following.
Workable with smart speaker
EXVAC900 can be connected to smart speakers such as Alexa, Google home,Yandex,Tmall Geneie.
Super Suction but Quiet
EXVAC900 SURPASS vacuums most types of floor dust and debris in 4 levels of suction power
Brushless Suction Motor
Verticalized Air Duct
Super Long-lasting Running
After one full charge, it works for maximum 245 min in quiet mode and 100 min in Max Mode
5200mAh
Battery Pack
Automatic
Recharging
Slim designed but strong
With a 9.8cm height to enter underneath areas or hard-to-clean places easily, and it can climb over obstacles up to 2cm hight
9.8cm
in height
Climb over
1.5-2cm obstcales
Press to Factory Settings
Clear the system bugs and recover it to the Factory Settings by a press
Floating Beater Brush
The floating beater brush is able to be lifted up and down so that EXVAC900 can vauum the floor thorougher with higher suction, especially when it is vacuuming on rugs.
bottom of page